HP LaserJet P2015 - Software Technical Reference

Optimize section
The Optimize settings are applied to all media printed depending on the engine’s internal tables. The
following controls are available:
●
Background Toner. The On setting selects optimized EP process parameters for reducing
background on glossy paper.
●
Extra Cleaning. High acid content or “talc” papers tend to leave a conductive residue on the OPC
drums. The On setting turns on increased OPC/ETB cleaning rotations before and after pages are
printed to help rub off this residue.
●
Trailing Edge Over-development (full-speed). The On setting selects optimized EP process
parameters for decreasing trailing edge over-development in full speed (Light and Plain media
types). Trailing edge over-development is a jump-gap developer defect which causes excess toner
at trailing edges of halftoned or solid areas.
●
Trailing Edge Over-development (half-speed). The On setting selects optimized EP process
parameters for decreasing trailing edge over-development in half speed (heavy and glossy media
types). Trailing edge over-development is a jump-gap developer defect which causes excess toner
at trailing edges of halftoned or solid areas.
●
Mottle Prevention. The On setting selects optimized EP process parameters for decreasing
developer mottle. This problem has largely been eliminated by cartridge and toner design changes.
System Setup
Use the System Setup screen to change the system defaults for the HP LaserJet P2015 printer.
Figure 2-25 System Setup screen
ENWW HP ToolboxFX 49
Software description