HP LaserJet P2015 - Software Technical Reference

default setting is 600 pixel(s). You can use the spin box to change this value to a maximum of 32,767
pixels.
Installable Options
Topics:
●
Tray 3
●
Duplex Unit (for 2-Sided Printing)
●
Allow Manual Duplexing
●
Printer Memory
●
Mopier Mode
●
Mopier mode and collation
●
Postscript Passthrough (PS 3 Emulation Unidriver only)
●
JPEG Passthrough (PS 3 Emulation Unidriver only)
Tray 3
This control specifies whether you have tray 3, an optional 250-sheet tray, installed on the device. The
default setting is Not Installed.
Duplex Unit (for 2-Sided Printing)
The HP LaserJet P2015dn and the HP LaserJet P2015x printer models come with a duplex unit installed.
This setting is enabled (Installed) by default.
Allow Manual Duplexing
Select Allow Manual Duplexing to print on both sides of any size and most types of media (except
transparencies, envelopes, and labels). To use this feature, reinsert the media stack into the input tray
to print the second side. The device pauses while you make this adjustment.
This setting is enabled by default.
Printer Memory
This option matches the setting to the amount of memory that is installed in the device. The driver
generates ranges of memory that can be selected, up to the maximum that the device can accept. The
driver can use this information to manage how the print driver uses the device memory.
Mopier Mode
The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated
copies from a single print job. Multiple-original printing (mopying) increases performance and reduces
network traffic by transmitting the job to the device once, and then storing it in memory. The remainder
of the copies are printed at the fastest speed. All documents that are printed in mopier mode can be
created, controlled, managed, and finished from the computer, which eliminates the extra step of using
a photocopier.
ENWW Device Settings tab features 191
HP unidrivers for
Windows