HP LaserJet P2015 - Software Technical Reference

Back Cover
Use the Back Cover options to include a blank or preprinted back cover on a document, or to include
a back cover from a source tray that is different from the one used for the remainder of the document.
The following figure shows the Back Cover setting and options.
Figure 4-10 Back Cover options
The following are the Back Cover options:
●
Size is: drop-down menu
●
Add a Blank or Preprinted Cover check box
●
Source is: drop-down menu
●
Type is: drop-down menu
The Size is: setting specifies the media size to use for the entire print job. Changes made to the Size
is: setting here override any previous Size is: settings in other Use Different Paper/Covers options.
When you select Back Cover, also select the Add a Blank or Preprinted Cover check box to enable
the setting. The Source is: and Type is: drop-down menus become available and a check mark appears
next to the Back Cover option.
NOTE: The Back Cover options are not available when the Booklet Printing Layout setting is
enabled on the Finishing tab. The back cover setting is unavailable, because this page would be printed
in the middle of a booklet.
ENWW Paper/Quality tab features 163
HP unidrivers for
Windows