HP LaserJet P2015 - Software Technical Reference

Front Cover
Use the Front Cover options to include a blank or preprinted front cover on a document, or to include
a front cover from a source tray that is different from the one used for the remainder of the document.
The following figure shows the Front Cover setting and options.
Figure 4-6 Front Cover options
The following are the Front Cover options:
●
Size is: drop-down menu
●
Add a Blank or Preprinted Cover check box
●
Source is: drop-down menu
●
Type is: drop-down menu
The Size is: setting specifies the media size to use for the entire print job. Changes made to the Size
is: setting here override any previous Size is: settings in other Use Different Paper/Covers options.
When you select Front Cover, also select the Add a Blank or Preprinted Cover check box to enable
the setting. The Source is: and Type is: drop-down menus become available and a check mark appears
next to the Front Cover option.
The Source is: setting specifies the source tray to use for adding a front cover to the document. The
list of source trays depends on the device accessories that are installed. Any optional trays that are
installed through the Device Settings tab also appear here.
The Type is: drop-down menu shows all of the media types that the device supports.
ENWW Paper/Quality tab features 159
HP unidrivers for
Windows