Use Guide - Appendix B: Control Panel Menus

Appendix B Control panel menus 188
Configure device menu
JAM RECOVERY=
AUTO
AUTO
ON
OFF
Determine how the printer functions when a jam occurs.
AUTO: The printer automatically selects the best mode for printer jam
recovery (usually ON). This is the default setting.
ON: The printer automatically reprints pages after a paper jam is cleared.
OFF: The printer does not reprint pages following a paper jam. Printing
performance might be increased with this setting.
RAM DISK=AUTO AUTO
OFF
This item determines how the RAM disk is configured. This item appears
only if there is no optional hard disk installed, and the printer has at least
8 megabytes (MB) of memory.
OFF: The RAM disk is disabled.
Note
If the setting is changed from OFF to AUTO, the printer automatically
reinitializes when it becomes idle.
LANGUAGE=ENGLISH Includes all languages in the list.
When scrolling through the language values, LANGUAGE= should be
updated so it is presented in the highlighted language.
Item Values Explanation