HP LaserJet 9000 Series - Software Technical Reference

Software Technical Reference for the HP LaserJet 9000 printers

Printer Memory

Total Memory. This shows the total amount of memory physically installed in the printer.

Driver Work Space. The Driver Work Space (DWS) option lets you specify the amount of work-

space memory available to the printer. In environments supporting bidirectional communication,

this option is configured automatically. To manually set Driver Work Space, print a configuration

page and find the DWS value in the memory section of the configuration page. Then, enter that

value in the Driver Work Space box in the More Configuration Options dialog box. An accurate

Driver Work Space value optimizes driver performance.

Fonts

The Fonts group box contains a Font DIMM check box and a corresponding Configure button.

Clicking the Font DIMM check box tells the driver that a Font DIMM is installed, and that stored

data regarding the fonts on the DIMM is available. When the check box is selected, the

Configure button is enabled. Click the Configure button to open the Configure Font DIMMs

dialog box. If the Font DIMM check box was not selected when you entered the More

Configuration Options dialog box, selecting that check box automatically opens the Configure

Font DIMMs dialog box.

Figure 36: The Configure Font DIMMs dialog box

The Configure Font DIMMs dialog box lets you:

• Add up to two font DIMMs by clicking the Add button.

• Specify a unique font DIMM name.

• Select specific font DIMM data files that contain lists of fonts on specified DIMMs.

• Select one or more installed DIMMs in the Installed DIMM list, and based on the selected

DIMM(s). The list to the right (Fonts on DIMM) will display all of the fonts available on the

selected DIMM(s).

• Enable or disable one or more of the selected font(s).

Use the following procedure to configure a font DIMM.

1. Make sure that the font DIMM is properly installed on the HP LaserJet 9000 printer.

2. Click Add. The Add Font DIMM dialog box appears.

3. Click Browse. The Font DIMM Files dialog box appears.