HP LaserJet 9000 Series - Software Technical Reference

Software Technical Reference for the HP LaserJet 9000 printers
65
Printer image
The bitmap image in the lower-right portion of the Destination tab screen represents the current
physical configuration of the printer according to the driver configuration data (obtained
automatically through bidirectional communication, or configured manually through the driver). It
should have the same appearance as the image in the same location on the Paper tab and the
Configure tab.
On the Destination tab, the printer image contains hot spots for selecting an output bin. When
the pointer moves over a hot spot, the arrow reverts to the gloved hand used in the bubble help,
the preview image, and other areas. The current output bin is highlighted in a bright green color
on the printer bitmap.
NOTE: On the Destination tab, only output bins have hot spots and can be
highlighted; source trays must be selected from the Paper tab.
Basics tab features
The Basics tab provides options for setting the number of copies to be printed and for the
orientation of the print job. It also lets you retrieve information about the driver.
Figure 32: The Basics tab
Copies
The Copies feature allows you to specify the number of copies to print.
The number of copies you request appears in the Copies box. You can select the number by
typing in the box or by using the up and down arrows to the right of the edit box. Valid entries are
numbers from 1 to 999. The copies value will not advance from 999 to 1 or change from 1 to 999
when the down arrow is used. Invalid entries into the edit box (such as non-numerical input,
numbers less than 1 or greater than 999) are changed to the last valid value when focus is
removed from the control. The default number of copies is 1.
Because applications can also be used to set the desired number of copies, conflicts between the
application and the driver can arise. In most cases, the application and the driver communicate,