HP LaserJet 9000 Series - Software Technical Reference

Software Technical Reference for the HP LaserJet 9000 printers
64
Releasing stored jobs at the printer
Once you send a print job using Job Retention, you can release the job to print using the printer
control panel.
1. Press the select button (the one with the check mark) to enter the menus.
2. Press the up and down buttons to scroll to RETRIEVE JOB, and then press the select button.
3. Press the up and down buttons to scroll to your job and press the select button.
4. Press the up and down buttons to scroll to PRINT (The PRINT selection should have an icon
next to it indicating that the job is locked).
5. Enter the PIN number and press the select button.
Deleting a print job
Sometimes it is necessary to delete a print job from the printer memory or hard disk. This can be
done from the printer control panel.
1. Press the select button (the one with the check mark) to enter the menus.
2. Press the up and down buttons to scroll to RETRIEVE JOB, and then press the select button.
3. Press the up and down buttons to scroll to your job and press the select button.
4. Press the up and down buttons to scroll to DELETE (The DELETE selection should have an
icon next to it indicating that the job is locked).
5. Enter the PIN number and press the select button.
Output Bin Options
The Output Bin Options group box contains a drop-down menu that lets you select from a list of
configured output bins. Only output bins configured on the Configure tab appear in this drop-
down menu.
The HP LaserJet 9000 printer has two default output bins that can be selected in the driver:
• Face-down bin refers to the main output bin at the top of the printer and is the default setting
for the HP LaserJet 9000 printer. Jobs sent to this bin are printed face down. This option is
always available.
• Face-up bin refers to the secondary output bin that extends from the left side of the printer.
Jobs sent to this bin are printed face up. This option is always available, and there are no
paper size or type constraints.
In addition, depending upon the bundle and the driver configurations, the HP LaserJet 9000
printer offers the following optional output devices:
• Optional 3000-sheet stapler/stacker. This single 3000-sheet stacking device
accommodates up to 3,000 sheets of Letter-sized and A4-sized paper, or up to 1,500 sheets
of 11-inch by 17-inch and A3 paper. It provides multi-position stapling for up to 50 sheets of
paper per document.
• Optional 3000-sheet stacker. This single 3000-sheet stacking device accommodates up to
3,000 sheets of Letter-sized and A4-sized paper, or up to 1,500 sheets of 11-inch by 17-inch
and A3 paper.
Options
The Options drop-down menu is inactive.