HP LaserJet 9000 Series - Software Technical Reference

Software Technical Reference for the HP LaserJet 9000 printers
60
Figure 31: The Destination tab
Destination Features
The Destination Features group box provides controls for Job Retention. This group box is only
visible if Printer Hard Disk or Job Retention Enabled is selected in the More Configuration
Options dialog box available on the Configure tab.
Hardware configuration and availability of Job Retention options
NOTE: The Job Retention in RAM feature is not supported under Windows 3.1x.
The Job Retention options available to you depends upon whether your printer has an optional
hard disk installed. Some of the Job Retention options require a printer hard disk (an optional
HP EIO disk drive). However, the feature called Job Retention in RAM allows you to use some of
the Job Retention options without installing a printer hard disk.
The Proof and Hold and Private Job options are available through the Job Retention in RAM
feature, and do not require the installation of a hard disk.
The Quick Copy and Stored Job options require the installation of a printer hard disk. To use all
four of the Job Retention options, the printer must have the optional hard disk installed, the
Printer Hard Disk selected on the More dialog box of the Configure tab, and the print driver
configured to use hard disk storage.
Configuring the printer driver for a printer hard disk
If the print driver on your computer is not yet configured to use the hard disk, follow these simple
steps:
NOTE: These steps must be completed for each driver.
1. Double-click the My Computer icon. This opens the My Computer window.