HP LaserJet 9000 Series - Software Technical Reference

Software Technical Reference for the HP LaserJet 9000 printers
59
• Color
• Labels
• Letterhead
• Plain
• Preprinted
• Prepunched
• Recycled
• Rough
• Transparency
For more information about media types and sizes, see "Media attributes".
Printer image
The bitmap image in the lower-right portion of the Paper tab represents the current physical
configuration of the printer and corresponds to its configuration data, either obtained
automatically through bidirectional communication or configured manually. It should look the
same as the image that appears in the same location on the Destination tab and the Configure
tab.
On the Paper tab, the printer image contains hot spots where you can select a paper source.
When the pointer moves over a hot spot, the arrow reverts to the gloved hand used in the bubble
Help, the preview image, and other areas. The current paper source, whether selected from the
drop-down menu or from a hot spot, is highlighted in bright green on the printer bitmap. The
following points are worth noting:
• Auto Select does not have a corresponding area to highlight on the bitmap.
• Selecting manual feed or tray 1 highlights the same part of the bitmap.
• Selecting on the area that represents tray 1 in the bitmap will always select tray 1.
Manual Feed cannot be selected by selecting the bitmap.
• On the Paper tab, only input trays have hot spots and can be highlighted. Output bins
must be selected from the Destination tab.
Destination tab features
The Destination tab provides options for Job Retention and output bins.