HP LaserJet 9000 Series - Software Technical Reference

Software Technical Reference for the HP LaserJet 9000 printers
57
Media source or
paper handling
accessory
Minimum size -
width by height
Maximum size -
width by height
3000-sheet stacker
face-down bin
148 mm by 210 mm
(3.9 inches by 7.5 inches)
312 mm by 470 mm
(12.28 inches by 18.46
inches)
3000-sheet
stapler/stacker
98 mm by 191 mm
(3.9 inches by 7.5 inches)
312 mm by 470 mm
(12.28 inches by 18.46
inches)
3000-sheet
stapler/stacker
face-down bin
148 mm by 210 mm
(3.9 inches by 7.5 inches)
312 mm by 470 mm
(12.28 inches by 18.46
inches)
Icons
The paper and envelope icons visually define width and height.
Measurement Units button
Like the dynamic command button previously described, the Measurement Units button is also
multi-titled, although its function is always to toggle the unit of measurement between standard
(inches) and metric (millimeters) units of measurement.
Close button
The Close button closes the Custom Paper Size dialog box according to the logic in the table
below. In all cases, any custom paper sizes successfully saved (and not renamed or deleted)
while the dialog box is open will remain in the paper size list in the Paper tab. The following table
lists options that appear when you click the Close button.
If the drop-down
menu contains …
And the button
says …
Then it will do this when the Close
button is clicked
Untitled Save The dialog box closes, but you lose the
changes that were not saved.
The current paper size remains the
same as it was when the Custom
button was selected.
<user-typed text> Save The dialog box closes, but you lose the
changes that were not saved.
The current paper size remains the
same as it was when the Custom
button was selected.