HP LaserJet 9000 Series - Software Technical Reference

Software Technical Reference for the HP LaserJet 9000 printers

Adjusting the left and right sides of the page at the same time

NOTE: The Y shift adjusts both the top and bottom sides. The X1 shift adjusts

the printed area to either the left or the right. Use the X2 shift to adjust

both the left and right sides of the printed area in the desired direction.

To adjust both the left and right sides of the printed area in the desired direction:

1. Examine the borders on the left and right of the registration page.

2. Note the X2 SHIFT value necessary to move the left and right borders in the desired

direction.

3. Press the select button to enter the menus.

4. Press the select button on the control panel display to enter the menus.

5. Use the up and down arrows to highlight CONFIGURE DEVICE, and then press the select

button to select.

6. Use the up and down arrows to highlight PRINT QUALITY, and then press the select button

to select.

7. Use the up and down arrows to highlight SET REGISTRATION, and then press the select

button to select.

8. Use the up and down arrows to highlight the name of the desired tray (ADJUST TRAY 1,

ADJUST TRAY 2, ADJUST TRAY 3, OR ADJUST TRAY 4), and then press the select button

to select.

9. Use the up and down arrows to highlight X2 SHIFT, and then press the select button to

select.

10. Use the up and down arrows to locate the value you identified in step 2, and then press the

select button to save the new value.

Job Retention in RAM

The HP LaserJet 8100 printer introduced Job Retention features that required the use of an EIO

hard disk. A feature of the HP LaserJet 9000 printer, called Job Retention in RAM, lets you use

some Job Retention options without an installed EIO hard disk in the printer.

The proof-and-hold and private job options are available with the Job Retention in RAM feature.

Other options continue to require the installed EIO hard disk.

NOTE: The Job Retention in RAM feature is not supported using Windows 3.1x.

For more information about the Job Retention feature, see the “Destination Features" section,

under “Paper tab features,” in the section about PCL 6 and PCL 5e driver features.

Job Status and Alerts

The HP LaserJet 9000 Series Printing System software includes a utility called Job Status and

Alerts that lets you monitor print jobs and printer status from the desktop. Job Status and Alerts is

a selectable component of custom installation. To install Job Status and Alerts, choose the

Custom Installation and click the appropriate check box.