HP LaserJet 9000 Series - Software Technical Reference

Software Technical Reference for the HP LaserJet 9000 printers
105
File name Font name
ps_11548.ttf Stempel Garamond Bold Italic
ps_14507.ttf Taffy
ps_13501.ttf Univers 45 Light
ps_13502.ttf Univers 45 Light Oblique
ps_14021.ttf Univers 55
ps_14022.ttf Univers 55 Oblique
ps_14023.ttf Univers 65 Bold
ps_14024.ttf Univers 65 Bold Oblique
ps_14029.ttf Univers 57 Condensed
ps_14039.ttf Univers 57 Condensed Oblique
ps_14030.ttf Univers 67 Condensed Bold
ps_14040.ttf Univers 67 Condensed Bold Oblique
ps_13547.ttf Univers 53 Extended
ps_14480.ttf Univers 53 Extended Oblique
ps_13548.ttf Univers 53 Extended Bold
ps_14481.ttf Univers 53 Extended Bold Oblique
Installation instructions
General installation for Windows 95, 98, Me, NT 4.0, and 2000 operating systems
General installation instructions for the Windows 95, Windows 98, Windows Me, Windows NT 4.0,
and Windows 2000 operating systems, presented in the following table, are similar. When
instructions are not shared by Windows 95, Windows 98, Windows Me, Windows NT 4.0, and
Windows 2000, the pertinent operating systems are listed in the left column of the table.
NOTE: If the HP LaserJet 9000 printer is connected through a file or print server,
the HP LaserJet 9000 Series Printing System software must first be
installed on the server first before being installed on any client systems.
If the HP LaserJet 9000 Series Printing System software is not first
installed on the server, bidirectional communication, Driver
Autoconfiguration, and Job Status and Alerts will not be available to the
client systems.
NOTE: For Windows NT 4.0 and Windows 2000, administrator rights on the
system are necessary to install the software.
NOTE: When the HP LaserJet 9000 printing system installer runs, the
HP LaserJet 9000 Series uninstaller is always added to the system.
NOTE: Bidirectional communication and Driver Autoconfiguration are installed
on the system only in supported network environments. Parallel and USB
connections do not support bidirectional communication.
To install the HP LaserJet 9000 printing system, follow these instructions:
1. Connect the printer to the computer, and turn the printer on.
2. Close all applications. Turn off virus checkers and TSR programs. After installation, these
programs can be turned back on.
3. If you are installing from the CD-ROM, insert the CD-ROM for the appropriate language into
the CD-ROM drive and go to step 4.