HP LaserJet 8150 Series Printers - Software Technical Reference

Printer features
62
Edge-to-Edge printing
The Edge-to-Edge feature on the HP LaserJet 8150 printer allows you to expand the
printable area on a page to within 2 millimeters (mm) of each edge (see illustration
below). This feature allows you to print as close to the edge of the paper as possible, and
is available for all supported media sizes. The HP LaserJet 8150 printer has a default
margin size of about 4.2 mm (1/6 inch) when the Edge-to-Edge feature is not on. The
following illustration shows a comparison between the standard printable area and that
available using the HP LaserJet 8150 Edge-to-Edge feature.
Figure 41: Comparison of standard and Edge-to-Edge printable areas
Calibration page
The Edge-to-Edge feature requires accurate registration of the paper trays. The
HP LaserJet 8150 Edge-to-Edge Calibration Page is available through the printer to
provide a visual tool for calibrating each tray on the printer. It provides instructions about
how to calibrate each tray, a set of marking lines on each side of the page, and a set of
thumbnails to use as a guide to compare against the marking lines. The calibration page
can be printed from each Internal tray (except the envelope feeder) and from the topmost
tray of an External input paper-handling device, such as the 2,000-sheet input tray or two
500-sheet input trays).