HP LaserJet MFP 8-bin Mailbox - Administrator Guide

Control panel message Description Recommended action
13.12.06
Jam in left accessory
4. Make sure that you are using supported
media weights and sizes. For more
information, see
Supported media
on page 45.
5. Verify that the face-up bin is correctly
installed.
6. Reinstall the face-up bin and verify that
it is properly seated.
7. Reattach the MBM.
8. Wait for the solid green status light to
appear on the user LED before you
continue printing.
13.12.50
Jam in left accessory
Media is present in the belt or the delivery
head.
1. Move the MBM away from the printer or
MFP.
2. Remove any media from the belt.
3. Remove any media from the delivery
head.
4. Make sure that you are using supported
media weights and sizes. For more
information, see
Supported media
on page 45.
5. Reattach the MBM.
6. Wait for the solid green status light to
appear on the user LED before you
continue printing.
13.12.51
Jam in left accessory
A paper jam exists in the belt. 1. Move the MBM away from the printer or
MFP.
2. Remove any media from the belt.
3. Make sure that you are using supported
media weights and sizes. For more
information, see
Supported media
on page 45.
4. Reattach the MBM.
5. Wait for the solid green status light to
appear on the user LED before you
continue printing.
13.12.52
13.12.53
13.12.54
Jam in left accessory
A jam exists in the belt or in the delivery head. 1. Move the MBM away from the printer or
MFP.
2. Remove any media from the delivery
head.
3. Remove any media from the belt.
4. Make sure that you are using supported
media weights and sizes. For more
information, see
Supported media
on page 45
ENWW Clear jams 27