HP LaserJet MFP 8-bin Mailbox - Administrator Guide

Control panel message Description Recommended action
65.22.72
65.22.73
output device condition
3. Make sure that the blind cover is seated
correctly. See
Paper-jam locations and
parts on page 26 for the location of the
blind cover.
4. Remove any media that might obstruct
the belt movement. See
Paper-jam
locations and parts on page 26 for the
location of the belt.
5. Reattach the MBM.
6. Wait for the solid green status light to
appear on the user LED before you
continue printing.
66.12.05
66.12.06
66.12.86
output device failure
An internal malfunction has occurred. Turn the printer or MFP off and then on again.
If the problem persists, call for service. See
Support information on page 33.
ENWW Control-panel messages 25