HP LaserJet MFP 8-bin Mailbox - Administrator Guide

Send a copy job to an output bin that is different from the
default
HP LaserJet 9040mfp/9050mfp and HP Color LaserJet 9500mfp
1. Touch the copy icon on the control-panel display.
2. Touch COPY SETTINGS, and then touch the Advanced tab.
3. Select the output bin for your copy job.
HP LaserJet M9040 MFP and HP LaserJet M9050 MFP
1. Touch Copy.
2. Scroll to and touch Output Bin.
3. Choose the output bin.
4. Touch OK.
The output bin options that are available for copy jobs differ depending on the operation mode. See the
following table for more information.
Operational mode Copy bin is enabled Copy bin is disabled
Mailbox mode UPPER BIN
BIN 1
1
BIN 2
BIN 3
BIN 4
BIN 5
BIN 6
BIN 7
BIN 8
Not applicable (the face-down bin 1 is
always used for copy jobs when the
Mailbox mode is set)
Stacker mode
Job Separator mode
Sorter/Collator mode
UPPER BIN (STRAIGHT PATH)
BIN 1
1
BINS 2-8 (CORRECT ORDER)
UPPER BIN (STRAIGHT PATH)
BINS 1-8 (CORRECT ORDER)
1
1
Default bin
ENWW Send a copy job to an output bin that is different from the default 19