HP LaserJet MFP 8-bin Mailbox - Administrator Guide

Turn off the designated default output bin for copy jobs

If the MBM is connected to an MFP, the face-down bin 1 is designated for regular copy jobs in the

following operation modes:

●

Stacker

●

Job Separator

●

Sorter/Collator

If the copy bin is turned off, regular copy jobs are sent to face-down bins 1 through 8 for the Stacker,

Job Separator, and Sorter/Collator modes.

NOTE: This option does not apply to the Mailbox mode. When the Mailbox mode is used, the face-

down bin 1 is always used for copy jobs.

HP LaserJet 9040/9050 Series printer

Use

or to scroll to CONFIGURE DEVICE, and then press .

Use

or to scroll to MBM-8 CONFIG, and then press .

Use

or to scroll to Copier Bin, and then press .

Use

or to scroll to the option to turn the copy bin on or off, and then press .

HP LaserJet 9040mfp/9050mfp and HP Color LaserJet 9500mfp

1. Press the Menu button.

2. Scroll to and touch CONFIGURE DEVICE.

3. Scroll to and touch MBM-8 CONFIG.

4. Scroll to and touch Copier Bin.

5. Scroll to the option to turn the copier bin on or off, and then touch OK.

HP LaserJet M9040 MFP and HP LaserJet M9050 MFP

1. Scroll to and touch Administration.

2. Scroll to and touch Device Behavior.

3. Scroll to and touch MBM-8 CONFIG.

4. Touch Copier Bin.

5. Touch Enabled or Disabled, and then touch Save.

14 Chapter 2 Configure the MBM for your work environment ENWW