HP LaserJet MFP 8-bin Mailbox - Administrator Guide

Set an operation mode
Set the operation mode at the printer or MFP control panel. Then configure the printer driver on all clients
so that it matches the operation mode that you set at the control panel.
Set the operation mode at the control panel
HP LaserJet 9040/9050 Series printer
1.
Use
or to scroll to CONFIGURE DEVICE, and then press .
2.
Use
or to scroll to MBM-8 CONFIG, and then press .
3.
Use
or to scroll to Operation Mode, and then press .
4.
Use
or to scroll to the operation mode that you want, and then press . The printer
turns off and then on.
5. Continue to
Set the operation mode in the printer driver to match the control-panel setting
on page 10.
HP LaserJet 9040mfp/9050mfp and HP Color LaserJet 9500mfp
1. Press the Menu button.
2. Scroll to and touch CONFIGURE DEVICE.
3. Scroll to and touch MBM-8 CONFIG.
4. Scroll to and touch Operation Mode.
5. Scroll to the operation mode that you want, and then touch OK. An asterisk (*) appears next to your
selection. The MFP turns off and then on.
6. Continue to
Set the operation mode in the printer driver to match the control-panel setting
on page 10.
HP LaserJet M9040 MFP and HP LaserJet M9050 MFP
1. Scroll to and touch Administration.
2. Scroll to and touch Device Behavior.
3. Scroll to and touch MBM-8 CONFIG.
4. Touch Operation Mode.
5. Select the operation mode you want to use, and then touch Save. The MFP turns off and then on.
6. Continue to
Set the operation mode in the printer driver to match the control-panel setting
on page 10.
ENWW Set an operation mode 9