HP LaserJet MFP 8-bin Mailbox - Administrator Guide

Get started
After the printer driver is installed, you have to configure the MBM in the printer driver and at the control
panel before you can use it.
Whether the MBM is connected to a printer or MFP, an output bin is set to be the first or only bin to
receive copies (the copy bin) or print jobs. See the following table for more information about which
output bins are designated to received copy and print jobs. For more information, see
Send a copy job
to an output bin that is different from the default on page 19.
When the MBM is
connected to
Operational mode Copy bin Default output bin for
copy jobs
Default output bin for
print jobs
Printer
●
Mailbox mode
●
Stacker mode
●
Job Separator
mode
●
Sorter/Collator
mode
(The printer does not
produce copies.)
(The printer does not
produce copies.)
Standard top bin
MFP Mailbox mode Not applicable (it is
always enabled in the
Mailbox mode)
Face-down bin 1 Face-down bins 2
through 8
●
Stacker mode
●
Job Separator
mode
●
Sorter/Collator
mode
Enabled (default) Face-down bin 1 Face-down bins 2
through 8
●
Stacker mode
●
Job Separator
mode
●
Sorter/Collator
mode
Disabled Face-down bins 1
through 8
Face-down bins 1
through 8
6 Chapter 2 Configure the MBM for your work environment ENWW