- HP Laserjet Enterprise 700 Manual

Formatter cage assembly
1. Remove the rear cover. See Rear cover on page 13.
2. On the rear side of the product, disconnect three connectors and one flat flexible cable (callout 1).
Figure 1-78 Remove the formatter cage (1 of 2)
1
3. Remove four screws (callout 1), and then lift up the bottom of the formatter cage (callout 2) to
remove it from the product.
Figure 1-79 Remove the formatter cage (2 of 2)
2
1
52 Chapter 1 Removal and replacement ENWW