- HP Laserjet Enterprise 700 Manual

3. On the rear side of the product, remove three screws (callout 1), and then remove the cover
(callout 2) from the product.
Figure 1-37 Remove the top rear cover
2
1
Left upper cover
1. Remove the following components or assemblies:
●
Top cover. See
Top cover on page 19.
●
Front cover. See
Front cover on page 11.
●
Control panel. See
Control panel assembly on page 33.
●
Rear cover. See
Rear cover on page 13.
26 Chapter 1 Removal and replacement ENWW