- HP Laserjet Enterprise 700 Manual

3. Pull the left side of the assembly (callout 1) away from the product, release the pin on the right
side of the assembly, and then remove the door assembly.
Figure 1-16 Remove the left door (2 of 2)
1
Rear cover
1. On the rear side of the product, insert a small screwdriver (or a paper clip) into the tab slot
(callout 1) to release a hidden tab, and then slide the rear pocket cover (callout 2) in the direction
indicated to remove the cover.
Figure 1-17 Remove the rear cover (1 of 2)
1
2
ENWW
Covers and doors
13