- HP Laserjet Enterprise 700 Manual

TIP: You do not have to separate the product from the feeder to remove these rollers.
1. Remove the tray from the product, and then locate the rollers on the right-hand side of the tray
cavity.
Figure 1-10 Remove the 1x500 or 3x500 rollers (1 of 2)
2. Release three tabs, and then pull the rollers in the direction of the arrow.
Figure 1-11 Remove the 1x500 or 3x500 rollers (2 of 2)
Reinstallation tip When you reinstall the rollers, make sure that the rollers snap into place.
10 Chapter 1 Removal and replacement ENWW