- HP Laserjet Enterprise 700 Manual

2. Disconnect one connector (callout 1), remove two screws (callout 2), and then remove the HCI
right tray pickup motor (callout 3).
Figure 1-215 Remove the HCI right tray pickup drive (1 of 2)
2
1
3
3. Remove three screws (callout 1), and then remove the right tray pickup drive (callout 2).
Figure 1-216 Remove the HCI right tray pickup drive (2 of 2)
2
1
HCI controller PCA
1. Remove the following components or assemblies:
●
HCI left tray. See
HCI left tray on page 131.
●
HCI left cover. See
HCI left cover on page 132.
●
HCI rear cover. See
HCI rear cover on page 134.
142 Chapter 1 Removal and replacement ENWW