- HP Laserjet Enterprise 700 Manual

2. Disconnect one connector (callout 1), remove two screws (callout 2), and then remove the HCI left
tray pickup motor (callout 3).
Figure 1-213 Remove the HCI left tray pickup drive (1 of 2)
3
1
2
3. Remove three screws (callout 1), and then remove the left tray pickup drive (callout 2).
Figure 1-214 Remove the HCI left tray pickup drive (2 of 2)
2
1
HCI right tray pickup drive
1. Remove the following components or assemblies:
●
HCI left tray. See
HCI left tray on page 131.
●
HCI left cover. See
HCI left cover on page 132.
●
HCI rear cover. See
HCI rear cover on page 134.
ENWW
Input devices
141