- HP Laserjet Enterprise 700 Manual

2. Remove two screws (callout 1), and then remove the rear lower cover (callout 2).
Figure 1-210 Remove the HCI rear lower cover
2
1
HCI left tray lifter drive
1. Remove the following components or assemblies:
●
HCI left tray. See
HCI left tray on page 131.
●
HCI left cover. See
HCI left cover on page 132.
●
HCI rear cover. See
HCI rear cover on page 134.
2. Disconnect one connector (callout 1), remove three screws (callout 2), and then remove the left
tray lifter drive (callout 3).
Figure 1-211 Remove the HCI left tray lifter drive
2
1
3
ENWW
Input devices
139