- HP Laserjet Enterprise 700 Manual

1x500 lifter-drive assembly
1. Remove the cassette from the feeder, and then remove the rear cover (see 1x500 rear cover
on page 101).
2. Disconnect two connectors (callout 1).
Figure 1-172 Remove the 1x500 lifter-drive assembly (1 of 2)
1
3. From the front, inside the tray cavity, remove three screws (callout 1), release one tab (callout 2),
and then remove the 1x500 lifter-drive assembly (callout 3).
Figure 1-173 Remove the 1x500 lifter-drive assembly (2 of 2)
2
3
1
112 Chapter 1 Removal and replacement ENWW