- HP Laserjet Enterprise 700 Manual
High-voltage power supply
1. Remove the following components or assemblies:
●
Left door. See
Left door on page 12
●
Fuser. See
Fuser on page 32.
●
Registration assembly. See
Registration assembly on page 37.
●
Paper feed assembly. See
Paper feed assembly on page 40.
2. Disconnect two flat flexible cables (callout 1) and one connector (callout 2).
Figure 1-146 Remove the high-voltage power supply assembly (1 of 5)
2
1
3. Remove two screws (callout 1).
Figure 1-147 Remove the high-voltage power supply assembly (2 of 5)
1
94 Chapter 1 Removal and replacement ENWW