- HP Laserjet Enterprise 700 Manual

4. Release two tabs (callout 1) and remove the rear fan (callout 2) from the rear fan holder
(callout 3).
Figure 1-134 Remove the rear fan (3 of 3)
1
1
3
2
Reinstallation tip When reinstalling the rear fan, make sure that the fan holder (callout 1), the
label of the fan (callout 2), and the fan cable (callout 3) are positioned as shown in the figure
below.
Figure 1-135 Reinstall the rear fan
3
1
2
Front fan
1. Remove the front cover. See Front cover on page 11.
ENWW
Motors, fans, and clutches
87