- HP Laserjet Enterprise 700 Manual

Fuser motor
1. Remove the front cover. See Front cover on page 11.
2. Disconnect one connector (callout 1), remove three screws (callout 2), and then remove the fuser
motor (callout 3) from the product.
Figure 1-131 Remove the fuser motor
3
2
1
Rear fan
1. Remove the rear cover. See Rear cover on page 13.
2. Disconnect one connector (callout 1) (J33) on the DC controller PCA.
Figure 1-132 Remove the rear fan (1 of 3)
1
ENWW
Motors, fans, and clutches
85