- HP Laserjet Enterprise 700 Manual

Table 1-2 Sensor locations (continued)
Item Description Removal process
12 Fuser output sensor This is removed as part of the fuser. See
Fuser on page 32.
13 Output sensor This is removed as part of the paper delivery assembly. See
Paper delivery
assembly on page 34.
Environment sensor
1. Remove the front cover. See Front cover on page 11.
2. Disconnect one connector (callout 1), release one tab (callout 2), and then remove the environment
sensor (callout 3) from the product.
Figure 1-122 Remove the environment sensor
1
2
3
Cartridge presence sensor
1. Remove the front cover. See Front cover on page 11.
ENWW
Sensors
79