HP LaserJet 2300 printer - External Software Technical Reference

Storage
You can use the Storage section to specify whether Job Storage is enabled. Job Storage is automatically enabled if
the printer has 48 MB of total memory or more. Job Storage Enabled determines whether Job Storage appears as a
feature on the Destination tab (for HP LaserJet 2300 printers that have at least 48 MB of total printer memory).
Ignore Application Collation
The Ignore Application Collation setting in the printer properties is used to allow the driver manage collation. You
cannot use the Ignore Application Collation setting alone to print non-collated copies. If you want to print multiple
copies of non-collated copies, make sure that the Mopier Enabled setting is Off and that that the Collate check box in
your application's Print dialog box is not selected.
Note
The Ignore Application Collation feature is not selected on the HP LaserJet 2300 and HP LaserJet 2300L models
unless 48 MB of memory is installed.
The following table shows the expected behavior for a two-page print job when the number of copies is three. In some
instances, the application collation setting overrides the Ignore Application Collation setting on the driver.
Table 16: Printer behavior with Ignore Application Collation settings
Mopier Enabled
setting
Ignore
Application
Collation check
box
Application
Collation check
box in Print
dialog box
Commands
sent by printer
Pages sent to
printer
Pages output
from printer
On On On
Off
None
QTY=3 1,2 1,2,1,2,1,2
On On On QTY=3 1,2 1,2,1,2,1,2
On Off Off Copies=3 1,2 1,1,1,2,2,2
Off Off On Copies=1 1,2,1,2,1,2 1,2,1,2,1,2
Off Off Off Copies=3 1,2 1,1,1,2,2,2
Off Off None Copies=1 1,2,1,2,1,2 1,2,1,2,1,2
Off Off None Copies=3 1,2 1,1,1,2,2,2
On On On
Off
None
QTY=3 1,2 1, 2
On Off On
Off
None
QTY=3 1,2 1, 2
Software Technical Reference HP traditional PCL 5e and PCL 6 driver features 95