HP LaserJet 2300 printer - External Software Technical Reference

•
The Total Printer Memory value is 32 MB.
•
The value shown in the (DWS)(driver work space) dialog box is 3.0 MB.
•
The Duplexing Unit check box is not selected.
•
The Allow Manual Duplexing check box is selected.
•
The Mopier Enabled check box is not available, and a Bubble Help message icon appears beside the check box.
The message states that 48 MB of memory is required to enable the feature.
•
The Job Storage Enabled check box (on the More Configuration Options subtab of the Configure tab) is not
selected, and a Bubble Help message icon appears beside the check box. The message states that 48 MB of
memory is required to enable the feature.
•
The Allow Scaling from Large Paper check box (on the More Configuration Options subtab of the Configure
tab) is not selected.
•
No optional paper source is selected.
When the HP LaserJet 2300d model is selected, the following settings apply:
•
The Total Printer Memory value is 48 MB.
•
The value shown in the (DWS) dialog box is 11.0 MB.
•
The Duplexing Unit check box is selected.
•
The Allow Manual Duplexing check box is selected.
•
The Mopier Enabled check box is selected.
•
The Job Storage Enabled check box (on the More Configuration Options subtab of the Configure tab) is
selected.
•
The Ignore Application Collation check box (on the More Configuration Options subtab of the Configure tab)
is selected.
•
The Allow Scaling from Large Paper check box (on the More Configuration Options subtab of the Configure
tab) is not selected.
•
No optional paper source is selected.
When the HP LaserJet 2300n model is selected, the following settings apply:
•
The Total Printer Memory value is 48 MB.
•
The value shown in the (DWS) dialog box is 11.0 MB.
•
The Duplexing Unit check box is not selected.
•
The Allow Manual Duplexing check box is selected.
•
The Mopier Enabled check box is selected.
•
The Job Storage Enabled check box (on the More Configuration Options subtab of the Configure tab) is
selected.
•
The Ignore Application Collation check box (on the More Configuration Options subtab of the Configure tab)
is selected.
•
The Allow Scaling from Large Paper check box (on the More Configuration Options subtab of the Configure
tab) is not selected.
•
No optional paper source is selected.
When the HP LaserJet 2300dn is selected, the following settings apply:
•
The Total Printer Memory value is 48 MB.
•
The value shown in the (DWS) dialog box is 11.0 MB.
•
The Duplexing Unit check box is selected.
92 HP traditional PCL 5e and PCL 6 driver features Software Technical Reference