HP LaserJet 2300 printer - External Software Technical Reference

When you print on both sides manually, the printer driver does not automatically select the appropriate print mode for
best print quality. Consequently, it is important to select the paper type that corresponds to the media you are using for
the print job. The following media types have a different print mode when you manually print on the second side:
•
Plain
•
Preprinted
•
Letterhead
•
Prepunched
•
Bond
•
Recycled
•
Colored
•
Rough
Heavy and Cardstock media can be manually printed on the second side, but there is no change to the print mode.
Transparencies and labels should not be manually printed on the second side.
Select the Print on Both Sides (Manually) check box to print on the second side of the paper for the base
HP LaserJet 2300, 2300L, and 2300n printers. Also select Print on Both Sides (Manually) on the other HP LaserJet
2300 models for media types that are not available when using the automatic duplexing unit, such as card stock,
labels, and thick media.
To print a multiple-page document, follow these steps:
1.
Select thePrint on Both Sides (Manually) check box.
2. When the printer's control panel shows the MANUALLY FEED message, insert the stack of paper (on which the
even-number pages have been printed) as indicated in the following figure.
Figure 46: Print on Both Sides Instructions
Software Technical Reference HP PCL 5e, PCL 6, and PS unidriver features 121