Latest News: Firmware Version 5.30 - 5969-6812

Latest News: Firmware Version 5.30 21
Optional:
Server Configuration Using Detailed View
On the
Quick Setup
configuration page (see step 4 on page 17), click
the
Detailed View
icon. You will see a page with tabs for each
protocol (shown below). These pages allow you to see and change
protocol configuration settings, which include all the settings that
were available to you in the wizard (in the previous procedure
starting on page 16). Consider the following configuration items.
Disabling Access for Other Protocols.
In the
Detailed View
(from the
Quick Setup
page), you can switch off all protocols not
being used on your network.
You can disable Microsoft networking (SMB) access by using the
Windows (SMB)
tab and the
Enable WIndows (SMB)
setting.
You can disable NetWare access by using the
NetWare
tab and the
Enable NetWare
setting. You can disable UNIX access to the server
by using the
UNIX (NFS)
tab and the
Enable NFS
setting.
Note ❏
Do
not
disable
Web (HTTP)
access. Maintain administrative
access to the server using this web interface.
If you should ever need to disable Macintosh access to this server,
use the
Mac (AFP)
tab and the
Enable AFP
setting.
Click
[OK]
and you will return to the
Quick Setup
configuration
page. If you have made any changes, click
[Restart Server]
to put
these changes into effect.