Latest News: Firmware Version 5.30 - 5969-6812

20 Latest News: Firmware Version 5.30
15. Click
[Next >]
. You will see the
Protocols
page, shown below.
Select the protocol(s) currently being used on your network.
Click
[Next >]
.
16. When you see the
Finish
page, click
[Finish]
. Click
[Close]
, and
you will return to the
Quick Setup
configuration page. If you
have made any changes, click
[Restart ]Server]
to put the changes
into effect.
This restarts the server with the configuration changes and
returns you to the main
Network Settings Wizard
page (see
step 5 on page 17). When the
Status
indicator remains
green
and the
SCSI
indicator is off, the server is ready for use. This
may take a few seconds to five minutes.
Return to the
Quick Setup
configuration page (see step 4 on
page 17) by clicking
[Close]
.
The next procedure is used for some optional configuration.