Latest News: Firmware Version 5.30 - 5969-6812

16 Latest News: Firmware Version 5.30
9. Go to the “
[Server]
” section and set “
Restart = yes
” to restart
the server.
Note ❏
In this file, you must leave at least one space before and after
the equals sign (=) .
10. Select
Save
from the
File
menu.
You will lose connection to the
System
folder when the server
restarts. When restarting is finished you will see a dialog box
asking for confirmation of the message that the server’s
connection has unexpectedly closed down. Click
[OK]
.
The
System
folder will disappear from the desktop. Go on to the
next procedure.
Procedure for Server Configuration Using the Wizard
After you have set the IP address using the previous procedure, the
server configuration can be customized most easily by using web
pages for Administrator access. You must be running TCP/IP on the
on the Macintosh as well as on the server. This procedure can also
be done in a similar way on a PC.
1. On the Macintosh, open the Internet browser.
2. Open the location with the server’s IP address as follows:
Alternatively, use the host name associated with the IP address
and assigned to the server.
You will see the initial server web page, as shown below.
3. Select the
Quick Setup
tab.
Format: http://<IP-address>
Example: http://192.124.138.80