Latest News: Firmware Version 5.30 - 5969-6812

Latest News: Firmware Version 5.30 15
3. From the
Select a file server
list, select the entry for your new
HP server. The default server name is
HPhhhhhh_AT
, where
hhhhhh
are the last six digits of the server’s MAC address. The
MAC address is displayed on the LAN Address label on top of the
tower. (The server name can be changed later during
configuration.) Click
[OK]
.
If the AppleTalk protocol is not running on this Macintosh, then
the server will not be listed in the
Select a file server
list. In
this case, click
[Server IP Address...]
, enter the IP address
assigned to the server, and click
[Connect]
.
4. Select
Registered User
for administrative access. By default, the
user name is set to
root
and the password is set to
pass
. Enter
them and click
[Connect]
.
5. Select the
System
folder and click
[OK]
.
6. Open the
System
icon created on the desktop and open the
ServerProperties
folder.
7. Open the
config.ini
file.
8. Go to the “
[IP]
” section and change the “
InternetAddress
”
setting shown to the IP address assigned to the HP server.