HP SureStore HD Server 4000 User's Guide - 5967-9979

4 Adding Hard Disk Drives

6. On the drive module, press the locking tab down while you pull

the drive lever out and fully up. The locking pin on the top of the

drive fully retracts to allow insertion into the slot.

(If you have removed the drive module from another slot or

another server, rather than from the shipping box, the drive

lever may already be in this position.)

7. Holding the module only by its plastic front bezel and the metal

tray, slide the module slowly into the slot until it stops, at the end

of the drive lever. The module remains extended about 5 mm or

0.2 inches from the adjacent surfaces in this position. See the

illustration below.

Unlocking the

drive lever.

With drive lever pulled

out, slide module into slot

until it stops.