HP SureStore HD Server 4000 User's Guide - 5967-9979

6
-
4 Shutting Down and Restarting
Normal Operating State
When the server has been initialized and the file system is ready,
the server is ready for client access or for further configuration.
The following are indicators of normal operation. Refer to the front
view illustration on page 6-2.
•
The main power light above the power switch is on.
•
The drive power lights on operating drives are green and the
drive activity lights flash when data is read or written.
•
The control panel displays the server name on the first line and
alternates on the second line between the date and time,
whether there are any alerts to read, and the IP address.
Examples:
It is normal for the IP address to
not
be shown if a control panel
password is currently set.
It is
not
normal for the IP address to be
000.000.000.000
. The
server is inaccessible in this case.
•
The link/activity light above the control panel display is green
when the network link is established. It blinks for each packet
transmitted or received.
•
The server is accessible over the network to client users using
standard network file system protocols. The server can be
administered using the embedded HD Server Admin (with a
web browser). For network setup and administration refer to
chapter 4. For client access see chapter 5, “Setting Up Client
Access”.
If your server deviates from the above conditions after it has been
set up, see chapter 11, “Resolving Problems with Your Server”.
HPHDSERV345ABC
Tue Jun 1 14:59
HPHDSERV345ABC
no alerts
HPHDSERV345ABC
192.168.001.001
not shown if
password is set