HP SureStore HD Server 4000 User's Guide - 5967-9979

Shutting Down and Restarting 6

Shutting Down and Restarting

Use this chapter when you are starting up, or shutting down, or

restarting the server

after

the first time you started it. When you

start the server for the first time, refer instead to one of the

following:

•

Quick Setup

sheet

•

“Connecting and Starting Up” on page 2-8

Starting Up the Server

Startup Steps

1. Attach the two power cords to the rear of the server and to

power outlets (preferably to separate power circuits).

2. On the front of the server, switch on power. (See the front view

illustrated on page 6-2.)

3. Verify that:

• The main power light (LED) above the power switch is on

and the power display (2-character LED) displays

• Drive power and drive activity lights (LEDs) blink to

indicate self-tests. The drive power light on each disk drive

module remains green.

• The control panel (LCD) displays self-testing and loading

messages.

Note ❏

If you see any of the following exceptions to the verification

checks listed above, refer to chapter 11, “Resolving Problems

with Your Server”.

• Lights described above fail to go on.

• Power display shows

• Control panel displays

FAIL

FAULT

anywhere in the text.

• Control panel remains unchanged for more than 10 seconds.