HP SureStore HD Server 4000 User's Guide - 5967-9979

4
When the server has been fully installed and you need instructions
on various methods to restart it, use chapter 6.
6. Shutting down and Restarting
describes the procedures
for shutting down the server, restarting it, and power cycling,
along with the needs for those procedures. The operating states
of the server are described.
The previous chapters aid in setting up the server. The remaining
chapters aid in tasks that you may or may not need to perform.
When you need to add a hard disk module or an optional tape drive,
use chapter 7 or 8.
7. Adding Hard Disk Drives
describes the selection,
installation, and setup of additional disk drive modules.
8. Adding a Tape Drive
describes selection and installation of
an optional tape drive. You can add an internal tape drive or
attach an external tape drive.
Once a tape drive is installed or attached to the server, use
chapter 9 to aid in ongoing backup and restore tasks.
9. Backing Up and Restoring Files
describes the tasks of
backing up your server and of restoring files to the server.
To update the firmware running on your server, use chapter 10.
10. Updating the Firmware
describes checking the current
firmware version and checking for other versions available. It
describes downloading a new version and updating the server to
use new firmware.
If you encounter problems with your server, use chapter 11.
11. Resolving Problems with Your Server
describes the
indicators and symptoms you could encounter, describes how to
isolate causes, and describes how to resolve the problem or
repair the faulty component.
The appendices provide supplemental reference information—
technical and regulatory specifications, and support and warranty
services.