HP SureStore HD Server 4000 User's Guide - 5967-9979

3
-
4 Configuration Using the Control Panel
Setup Parameters and Procedures
Setting
Password,
Auto-Restart,
Link Speed
Refer to the table on page 3-6 for the setup changes you want to
make on the control panel. Examples of setup changes are:
•
You may set a password to limit access to the control panel. Set
the
Change Password
parameter.
•
You may want the server to automatically attempt to restart
following critical errors rather than halt and wait. Set the
Auto
Restart
parameter.
•
If you must fix a specific link speed or duplex mode, rather than
have them set automatically, set the
Link Speed
parameter.
Scroll to the control panel parameter (the sequence is shown in
the table). As the scroll symbol

in the top line of the display
indicates, use the following buttons:
▼
to scroll “down” to the next parameter in the list
▲
to scroll “up” to the previous parameter in the list
To select the parameter for setting, press
✔
(when the scroll
symbol

is in the first line of the display).
Use the
▲
and
▼
buttons to scroll through the choices of
settings (when the scroll symbol

or flashing characters are in
the second line of the display) or to edit characters in the
setting. Press
✔
to accept the setting.
Refer to “Control Panel Reference” on page 3-1 for button
behavior.