HP SureStore HD Server 4000 User's Guide - 5967-9979

Resolving Problems with Your Server 11

7. Detach the next connection behind the removed RJ-45

connector—the power cable. (See the illustration below.)

Now the server is fully detached.

8. Push the server module from the inside rear and receive it from

the front of the enclosure with your other hand beneath the

module. Support the module with your whole hand; do not pull on

the front plastic panel.

9. Make sure that the new server is installed in its metal tray in the

same way as the old one.

10. Insert the new server module into the server slot at the front of

the server. The tray must fit between two sheet metal guides at

both sides of the enclosure. If the tray does not slide easily, it may

not be inside the guides. When the tray is fully inserted, its front

holes align with the holes in the metal front of the enclosure.

Detach

power

cable

Slide tray

between

sheet metal

guides