HP SureStore HD Server 4000 User's Guide - 5967-9979

11
-
26 Resolving Problems with Your Server
4. Shut down the server
,
using one of the following methods.
• Use the control panel’s view mode, as follows: Press
✔
twice. Use the
▲
or
▼
button to scroll to the
Shutdown
Server
parameter. Press
✔
and confirm with
✔
again.
• Use HD Server Admin’s
Configuration Æ
Shutdown/Restart
page. Click
Shutdown
and
[Apply]
.
5. When you see the following display on the control panel, use the
power switch to switch the server’s power off.
6. Disconnect both power cords from the rear of the server.
CAUTION!
❏
Never open the side door of the enclosure when power cords are
attached. You risk electrical shock even when the power is
switched off.
7. Use the server’s key to unlock the enclosure keylock if necessary.
(See illustration on page 11-1.)
8. Remove the front bezel from the server:
Grasp the indentations at the sides near the top of the bezel.
Pull the top forward, swinging it down to clear the retaining
clips at the bottom of the enclosure. Lift the bezel away from the
enclosure and set aside.
Power off or
✔
to restart
Removing the
front bezel