HP SureStore HD Server 4000 User's Guide - 5967-9979

Resolving Problems with Your Server 11
-
23
Replace Disk
Drive Module
1. Notify users of the interruption in service while the server is
shut down, and recommend that they close all files.
2. Shut down the server and leave the power on, using one of the
following methods. (If the server is
not
powered on, skip this step.)
• Use the control panel’s view mode, as follows:
Press
✔
twice. Use the
▲
or
▼
button to scroll to the
Shutdown Server
parameter. Press
✔
and confirm with
✔
again.
• Use HD Server Admin’s
Configuration Æ
Shutdown/Restart
page. Click
Shutdown
and
[Apply]
.
The server will halt and display on the control panel:
3. Unlock the drive keylock if necessary (see illustration below). The
unlocked position is marked beside the keylock—pointing toward
the right side of the server.
4. On the drive module, press the locking tab down while you pull
the drive lever out and fully up. Pull out the drive by its drive lever.
5. Unpack the new disk drive module if necessary. Pull out the
plastic shipping plug from between the drive lever and the locking
tab.
Power off or
✔
to restart
Unlocking the
old drive
Drive keylock