HP SureStore HD Server 4000 User's Guide - 5967-9979

11
-
22 Resolving Problems with Your Server
7. Check your lists of backup sets for the components described
below and for how to restore them. (For using a local tape drive,
see “Restoring Files” starting on page 9-9). and restore all data
and configuration files.
• Directories that are parents of the shares and the backup
file sets:
Check your backup sets to determine which directories will
not be restored from backups. Create those directories on
the server. Use the
Configuration Æ File Shares
page as
described on page 4-10.
• The
c/system/
or
c/system/config/
directory (the
configuration files):
Restore that directory from backups to overwrite the same
default directories.
If that directory is not backed up, then configure your users,
groups, passwords, shares, and backup schedules as
described on pages 4-10, 4-11, and 9-7.
• Directories and files.
Restore them from backup sets. If they are not backed up,
users will need to recreate them.
8. Restore the entire configuration to the Flash memory in the
server. Use
Configuration Æ Save/Restore Configuration Æ
Restore Configuration
.
9. Restart the server and verify that all configuration has been
restored and updated.
10. Save the server and network configuration that is currently being
used from Flash memory to be on the volume. Use
Configuration Æ Save/Restore Configuration Æ Save
Configuration
. Back up the
c/system/
or
c/system/config/
directory again.