HP SureStore CD-ROM Server/Tower User's Guide - 5967-2149

5-20 Setup for Novell Networks
Secondary Time Servers. Set the following server configuration
parameter for NetWare:
Server Password
You can change the following general server parameter:
Methods for
Configuration
Methods for configuring the server and the access rights
described above include the following:
•
Any text editor can be used to directly edit and save the con-
figuration and access files stored on the server. Precision in
editing the files is required. (These access rights can be
restricted for other client workstations.) See “Using a Text
Editor to Edit Server’s Files” on page 7-10 for details.
•
For Windows 95/98 and NT 4.0 systems, the HP CD-ROM
Server Utility software can be downloaded from HP’s elec-
tronic distribution sites. For details see “Electronic Support
Services” on page A-1. This software utility provides an
easy-to-use graphical interface; using it makes changes in
the configuration and access files stored on the server.
•
If TCP/IP and HTTP are available, then a web browser can
be used to access the server’s web page. This is an easy way
to make changes in the configuration and access files stored
on the server. See the section “Using a Web Browser and
Server Web Page” on page 7-8 for details.
Parameter Name Value Description
TimeSyncSources
SAP
or
srv1,srv2
Default
SAP
means automatically
find the primary time servers. Or,
enter the server names to be con-
tacted for time synchronization as
server1,server2,
... (using
commas).
Parameter Name
Example
Value
Description
ServerPassword
fy98db
Default:
pass
The Supervisor, Administrator, or Root
password used for protocols HTTP,
NetWare bindery, SMB user level,
SNMP, and FTP. After the configuration
is written, the password appears as an
asterisk * for each character.