HP SureStore CD-ROM Server/Tower User's Guide - 5967-2149

5-18 Setup for Novell Networks
To Use NetWare/IP Only.
You can disable the IPX protocol on the server:
1. Set the following CD-ROM server configuration parameter
for NetWare:
2. After restarting the server, set the following CD-ROM server
configuration parameters for NetWare:
3. Restart the server again, and wait 5 minutes.
The server will then be accessible to the clients that support
the NetWare/IP protocol.
Note ❏ If the clients cannot then access the server, then do the
following:
a. Switch off the power to the server.
b. Wait 20 minutes for the SAP table to be flushed.
c. Switch on power to the server.
d. Wait 5 minutes for the server to be visible. All NetWare/IP
clients should now be able to access the server.
Parameter Name Value
NWEnable no
Parameter Name Value
InternalNetAddress
Internal network address
ServerName
Hexadecimal string that is unique on
the network, following Novell guide-
lines.